DA11

From LavryEngineering
(Difference between revisions)
Jump to: navigation, search
Line 29: Line 29:
  
 
===Connections===
 
===Connections===
1.) Line inputs
+
1.) Line outputs
The AD11 has "Combo connectors" that can accept XLR or 1/4" [[T.R.S.]] or [[T.S.]] phone plugs for balanced or unbalanced sources. The XLR inputs can also accept low impedance microphone inputs.
+
The DA11 has XLR line outputs for balanced or unbalanced connection. XLR to RCA adapters are included for connection to equipment with RCA inputs.
  
The 1/4" input is wired in a standard manner so the tip is the "+" signal conductor for either T.R.S. or T.S. connections. The sleeve is the "-" signal conductor for T.R.S. connections and would be grounded by the sleeve in T.S. connections.
+
The XLR outputs can be configured for balanced or unbalanced connection using the front panel settings for "'''pin 2'''" and "'''pin 3''';" which refer to the pin numbers of the XLR output connectors. The standard wiring for XLR to RCA adapters or adapter cables is to connect Pin 3 to Pin 1 ("ground") and pin 2 carries the signal. Thus, the correct front panel setting for both the included adapters and standard adapter cables is "Pin 2 on, Pin 3 Off." Please see page 1 of th eDA11 manual for setting instructions, and the Operation section of the manual for more details.
  
The XLR input is Pin 2 "+" and Pin 3 "-" for normal signal polarity. Thus, for unbalanced Line level XLR connections, the "hot" signal conductor would be connected to Pin 2 and the signal return would be connected to Pin 3. In Microphone mode, the AD11 accepts ONLY low impedance balanced microphone inputs.
+
The XLR output is Pin 2 "+" and Pin 3 "-" for normal signal [[polarity]]. Thus, for balanced or unbalanced connections, the "hot" signal polarity is "normal" or "non-inverted" when th efront panel "'''invert'''" setting i
  
 
2.) Digital outputs
 
2.) Digital outputs

Revision as of 17:38, 21 March 2012

Contents

Product Description

The LavryBlack DA11 is a stereo digital to analog converter that accepts stereo digital audio via XLR, RCA, optical, and USB and outputs line level analog audio. There is also a built-in headphone amplifier and front panel 1/4" headphone jack. A stepped analog Volume control adjusts both the main line output and the headphone output level.

For more information on the LavryBlack DA11 click here

For general information see digital to analog converter.

Features

Applications

Connections

1.) Line outputs The DA11 has XLR line outputs for balanced or unbalanced connection. XLR to RCA adapters are included for connection to equipment with RCA inputs.

The XLR outputs can be configured for balanced or unbalanced connection using the front panel settings for "pin 2" and "pin 3;" which refer to the pin numbers of the XLR output connectors. The standard wiring for XLR to RCA adapters or adapter cables is to connect Pin 3 to Pin 1 ("ground") and pin 2 carries the signal. Thus, the correct front panel setting for both the included adapters and standard adapter cables is "Pin 2 on, Pin 3 Off." Please see page 1 of th eDA11 manual for setting instructions, and the Operation section of the manual for more details.

The XLR output is Pin 2 "+" and Pin 3 "-" for normal signal polarity. Thus, for balanced or unbalanced connections, the "hot" signal polarity is "normal" or "non-inverted" when th efront panel "invert" setting i

2.) Digital outputs The digital outputs consist of (1) male XLR,(1) RCA socket, and (1) USB connector.

The output format for both the XLR and RCA outputs is selected by front panel setting for "AES" or "SPDIF" (which is IEC 60958 type II).

The USB output utilizes the native OS drivers for both windows and Apple operating systems.

Operating tips

Links

(link to manual)

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox