Difference between revisions of "Analog interconnects"
Brad Johnson (talk | contribs) |
Brad Johnson (talk | contribs) |
||
| Line 7: | Line 7: | ||
#Un-balanced | #Un-balanced | ||
| + | For more information see [[Balanced]] and [[Unbalanced]] | ||
===Balanced interconnects=== | ===Balanced interconnects=== | ||
Balanced interconnects typically take the form of shielded twisted-pair cable with XLR or 1/4" [[T.R.S.]] connectors on one or both ends. Most cables have the same type of connector on both ends; but an [[Adapter cable]] can be used to make a balanced connection between equipment that has an XLR connector and equipment that has a T.R.S. connector. | Balanced interconnects typically take the form of shielded twisted-pair cable with XLR or 1/4" [[T.R.S.]] connectors on one or both ends. Most cables have the same type of connector on both ends; but an [[Adapter cable]] can be used to make a balanced connection between equipment that has an XLR connector and equipment that has a T.R.S. connector. | ||
Revision as of 13:00, 7 March 2012
Overview
The term "Analog interconnects" is used to describe electrical interconnects which connect audio equipment. This can include coaxial cables with RCA connectors, shielded twisted-pair cable with XLR connectors, twisted-pair or coaxial cables with 1/4" "phone" connectors, and adapter cables with different connectors on each end.
Basics
Analog interconnects basically fall into two sub-categories:
- Balanced
- Un-balanced
For more information see Balanced and Unbalanced
Balanced interconnects
Balanced interconnects typically take the form of shielded twisted-pair cable with XLR or 1/4" T.R.S. connectors on one or both ends. Most cables have the same type of connector on both ends; but an Adapter cable can be used to make a balanced connection between equipment that has an XLR connector and equipment that has a T.R.S. connector.