The Lavry AD122 has been discontinued. The newer models available for sale are the AD122-96 MKIII and the AD122-96 MX.
Key features
KEY FEATURES
24 bit conversion at 96kHz, 88.2kHz, 48kHz and 44.1kHz
Unequaled detail and performance
True -127dB noise floor
0.00005% Total Harmonic Distortion + Noise
Lavry’s exclusive αcoustic βit Correction™ for wordlength reduction with dither and noise shaping
Switchable digital soft-knee limiter, +3 or +6dB gain
Precision reference meter bridge
Fully programmable digital test tones for system alignment
AES and word clock external synchronization 40-51kHz, 88.2kHz, 96kHz
DC removal
Absolute Polarity Inversion
Multi-converter synchronization
SUITABLE FOR
Tracking
Mixing
Mastering
Post Production
Tech specs
PERFORMANCE
Noise Floor at 44.1-48KHz sampling:
-130dB ±1dB from full scale A weighted
-126dB ±0.5dB from full scale unweighted
Noise Floor at 96KHz sampling:
-127dB ±1dB from full scale A weighted
-123dB ±1dB from full scale unweighted.
Output Bits:
16 to 24 bits, user selectable.
Total Harmonic Distortion and Noise (Specified for 22-24 Bits output, balanced inputs):
0.00005% for signals lower than -40dBF
0.0004% for signals lower than -20dBF
0.0008% for signals lower than -6dBF
0.0012% for full scale signals
Channel Separation:
Greater than 120dB (0-20KHz)
ANALOG INPUT
The analog signal can be amplified by 0-12dB utilizing the front panel screw adjust trim pots. Full-scale signal with 0dB gain is 24dBu, (full-scale signal with 12dB gain is 12dBu).
Input impedance over 0-100 kHz: greater than 20k ohm (pin 2 to pin 3).
XLR connector: AES/EBU levels into 110 Ohms for digital audio or TTL level into 110 Ohms word clock
DIGITAL OUTPUT
XLR AES/EBU output transformer coupled. Compatible with most RCA/SPDIF inputs using simple wired adapters or adapter cables.
The power supply automatically adjusts to AC inputs in the range of 90 to 264 volts at line frequencies between 47 and 63 Hz. It is not necessary to change any settings.
